Sealing Boat Deck Hardware

sealing boat deck hardware

A leak around deck hardware is not only annoying, it is probably damaging your boat. using today's sealants, making deck hardware watertight is not all that difficult, and if you bed your boat's. The boat builder now starts installing hardware, ports and hatches in that deck by cutting out the opening or drilling mounting holes through the deck and the core. then the hardware is installed, using a marine sealant to make sure there are no leaks. all is well for the first several years.. The "can't be seen, must not be there" mentality certainly rings true in the category of deck hardware installations. the re-bedding of deck hardware is a time consuming task but one that can save your five, six or seven figure vessel from loosing 25% to 50% of it's market value due to saturated and rotted decks..

Marine caulking~ which one do i use?? | boatworks today

Pair of marine nav 12v lights black side mount port

sealing boat deck hardware If your boat has a fiberglass deck, it is strongly recommended to install each piece of your hardware on uhmw polyethylene plates. before installation, embed all pieces in an adhesive sealant. ask a friend to help you secure bolt heads on the deck while you thread all the nuts from down below.. The best-known modern marine sealant, 3m 5200, a polyurethane, has a well-deserved reputation for unsurpassed strength and tenacity that makes it the go-to sealant. but, as you'll see below, for many applications, including bedding deck hardware, another product would be a wiser choice..